Help · Mix Desk
Mix Desk.
The mic desk of each scene: which mics, where on the speaker and how much of each.
What it is
Each Experience has its own mic desk. It decides which mics sit in front of the cabinets, where each one is on the speaker and how much of each you hear. Every mic and position is an IR made by us for that scene’s cabinet, so changing the mic or the position changes the tone the way it would in a studio.
The desk opens with the scene’s own mix. Change whatever you like and go back to it any time (see “Back to the scene’s mix”, below). The Mix Desk is in the program and in the plugin; in the plugin, each Fidelis Rig track has its own desk.
Open and close
Open: in the top bar, in the AMPS & CABS area, click the Mix Desk button (the one with a mixing desk drawn on it). It only shows in scenes that have a desk; a paid scene you haven’t unlocked yet doesn’t show it.
Close: click the X at the top right, or press Esc (if the EQ window is open, the first Esc closes only the EQ). Picking any item in the top menu also closes the desk, and so does leaving the scene.
What you see
- At the top: the title and the scene name; the word “Edited”, in orange, when your mix differs from the scene’s mix; the Auto Level, Auto Align, Mono and Reset Mix buttons; and the X.
- Two cabinets: Amp L and Amp R, each with its speaker. A cabinet marked “NO CAPTURE” has no mic recorded in this scene and stays silent.
- On each cabinet: up to 3 mic cards (number, type and position), the speaker drawing with the positions, and one desk channel per mic. Each cabinet has 1 to 3 mics (6 on the whole desk). Colors help you find them: mic 1 is orange, 2 is cream and 3 is teal.
- On the right, the Output column: the L and R output meters, each with a red Clip light on top.
Hover over a button or control to see its tip. To turn tips off: View, Turn off tips.
Mics and positions
Pick the mic to change
Click the mic card, the mic drawn in front of the cabinet, or its channel. The selected mic is the one the speaker drawing moves.
Change the mic type
At the top of the channel, open the first list and pick the type. Changing the type keeps the position.
| Dynamic | Kick | Condenser |
|---|---|---|
| DYN 57, DYN 58, DYN 421, DYN 421 45, DYN 4 | KICK 2 | CON 800, CON 800 45, CON 17, CON 87, CON 87 45 |
In the paid scenes, all 11 types work in all 5 positions: 55 IRs of our own in every paid scene. A type with no capture in a scene shows “NO CAPTURE” next to its name.
Move it on the speaker
Five positions, from the center to the edge: Center, Cap Edge, Mid Cone, Outer Cone and Far Edge. Near the center the sound is brighter; near the edge, darker.
- pick the position in the channel’s second list;
- or click one of the 5 dots on the speaker drawing, or a name in the list next to it;
- or drag the drawn mic to another dot.
There’s no distance or angle control: the 5 positions are the ones captured.
Add or remove a mic
- Add: click “Add mic” on the first empty channel, or click an empty (dashed) spot in front of the cabinet. The new mic comes in as DYN 57, on the first free position, with the fader at 0 dB, panned to its cabinet’s side and with the EQ flat.
- Remove: click the x at the top of the channel (tip: “Remove mic”). It only shows when the cabinet has more than one mic: each cabinet always keeps at least one.
The channel controls
- Fader: from -60 dB to +6 dB, and -inf (off) at the bottom. Click or drag on the track. The value shows in a small box below (for example “+1.5 dB”).
- Pan: drag up to go right (R) and down to go left (L); the mouse wheel works too. It reads “C” (center), “L50”, “R100” and so on.
- Type an exact value: double-click the value box of the fader or the Pan, type, Enter to confirm, Esc to cancel. Fader: a number in dB, like
-3.5(below -60 it becomes -inf). Pan:C,L50,R100, or a number from -100 to 100. If the value doesn’t fit, the field turns red and stays open. - S (Solo): you hear only the soloed mics, from both cabinets; more than one can be soloed. Solo is not saved: it turns off with Reset Mix and when you change scenes.
- M (Mute): silences the mic, even when it’s soloed. Mute is saved with your mix.
- Polarity (the button with a crossed circle): inverts the mic’s polarity. It lights orange when the inverted polarity is the one playing, whether you set it or Auto Align did. Your choice wins over Auto Align’s. Two mics on the same cabinet sound thin or hollow together? Inverting one can bring the low end back.
EQ
The channel’s EQ button opens that mic’s equalizer; it lights orange when the EQ is on and not flat. In the window: the mic name, the On button (the whole EQ), Close, and the “LIVE SPECTRUM”, showing the mic’s sound as you play (after the EQ, before the fader).
- On the curve: H is the low cut (HPF) and L the high cut (LPF), dragged sideways; 1 to 4 are the four bands: drag sideways for frequency, up or down for gain, and use the mouse wheel on the point for the Q.
- Under the curve: HPF (Off to 800 Hz), Lo Shelf (30 Hz to 500 Hz), Lo Mid (80 Hz to 2 kHz), Hi Mid (500 Hz to 8 kHz), Hi Shelf (2 kHz to 18 kHz) and LPF (1.5 kHz to Off). The four bands’ Gain goes from -18 dB to +18 dB.
- Double-click the number under a knob to type a value (
250,2.5kor2.5 kHz, for example).
The output and the Clip light
The Output column shows what leaves the desk, on L and R: green below -8 dB, yellow from -8 to 0 dB, red above. The red Clip light on top lights when that side reaches 0 dBFS and goes off by itself a second and a half after the last peak. If it lights often, lower that side’s faders.
There’s no master fader on the desk. The Pan L, Pan R, Spacer and Mono in the top bar act on the whole output, after the desk.
Auto Level, Auto Align and Mono
- Auto Level: off, it’s a real desk, each fader moves only its own mic. On, when you move a fader, the other mics of the same Amp follow to keep the volume, so you balance the mics of a cabinet without its level going up or down. With one mic per cabinet it changes nothing, and it leaves the faders alone while a Solo is on. It starts off in every scene.
- Auto Align: lines up the mics of each Amp in time and polarity, so one doesn’t cancel the other. Never between Amps. On, its tip shows how much each mic was adjusted and whether the polarity is normal or inverted. Off, the mics keep their real timing. It starts on in every scene.
- Mono: the same Mono as the top bar. Turning it on here or there is the same.
Back to the scene’s mix
- Reset Mix puts the desk back to the scene’s mix: mics, positions, faders, Pan, Mute, polarity, EQ, Auto Level and Auto Align, and it turns the Solos off. Only the desk: pedals and the rest of the rig stay as they are. If your mix differs from the scene’s (or a Solo is on), it asks first: “Return the desk to the scene’s default? Your current mix will be lost.” Click Back to default, or Cancel. Want to keep your mix? Save a Rig Preset first.
- File, Restore scene factory defaults puts the whole scene back to factory, the desk included, and asks first. Songs, parts and Rig Presets stay.
Is my mix saved?
The desk belongs to each scene: changing the Castle desk doesn’t change the Moscow one.
- With File, Auto Save, Manual Mode on, your mix is kept for the next time you open the scene, along with the pedalboard. With it off, the scene opens with factory settings next time, unless you save a Rig Preset (File, Save As, Rig Preset), which keeps the desk with the rest of the rig.
- In Song Mode, song parts don’t store the desk: changing parts doesn’t change the mix.
- In the plugin, the mix is saved in the DAW project, with the pedals and the rest of the rig. Each Fidelis Rig track keeps its own desk. Save the project in your DAW to keep it.
- When a scene is updated in a new version, the “This scene was updated.” window may show up. “Use the platform default (recommended)” brings the scene’s new mix; “Keep my settings” keeps yours. Your saved Rig Presets don’t change.
The free Studio and the paid scenes
Studio (free): comes with its own mic mix. The desk opens, but it’s locked to that mix: the controls show a padlock, and if you try to change something the top of the desk shows “Available with paid editions of Fidelis Rig.” The Studio tour also says: “The Mix Desk comes with the paid Experiences.” You can still open the desk, pick a mic to look at, open the EQ to look (without changing it), watch the meters and the spectrum, and turn Mono on and off.
Paid scenes: everything unlocked. Each one comes with its own mix, with the mics and positions chosen for that rig, and Reset Mix always brings it back.
Quick tips
- Start from the scene’s mix and change one thing at a time. The orange “Edited” tells you that you’ve left it.
- Use Solo to hear one mic alone while you pick its position.
- Two mics on the same cabinet sounding hollow: keep Auto Align on, or try the polarity on one of them.
- The Clip light keeps lighting: lower that side’s faders.
- Like the mix? Save a Rig Preset so you don’t lose it.
Still stuck? Write to contact@fidelisrig.com and tell us what you see on the screen.
